Concrete cutting in Liberal KS - straight cuts made right where you planned them
Need a cracked section of slab out, a trench or an opening in a wall? We plan each cut before the saw starts.
- Licensed and fully insured.
- Free estimates at your property.
- Replies within 1 business day.
Can you cut through concrete that's already poured?
Yes. Concrete cutting saws through slabs that are already in place, like floors, driveways and sidewalks, or through walls to make new openings, and at Premier Liberal Concrete we do it for homeowners in Liberal who need a trench, a doorway or a bad section taken out without tearing up everything around it.
Most cutting calls start with something already poured that now has to change, like a driveway panel that cracked and sank, a new drain line that has to cross the garage floor, or a doorway you want through a basement wall. The price moves with how thick the concrete is, how much rebar, the steel bars that strengthen a slab, runs through it, the shape of each cut, and whether you want the pieces hauled away or just sawn and left in place. The schedule mostly turns on the weather for outdoor work, on whether the slab needs a scan first, and on what the city needs from us. The written estimate I leave you explains each of those for your job, so you can see what you'd be paying for before any saw comes out.
How do you know a slab or wall needs cutting?
A sunken, cracked section
One panel of your driveway or patio has cracked and dropped while the slabs around it still sit level. That usually means the dirt under that piece settled or washed out, and the longer it waits, the more water runs under the edge and the bigger the trip lip gets.
A new pipe or drain route
A drain, water line or conduit has to run under a garage or basement floor that's already poured. Breaking it out with a hammer leaves ragged edges that keep cracking and are harder to patch, while a saw cut leaves a clean trench that closes up neatly.
A wall with no opening
You want a doorway, window or pass-through in a concrete wall, often in a basement. It's worth planning early, because the framing and finish work around that opening can't start until it's cut.
How we handle concrete cutting, start to finish
Concrete cutting starts with me looking at what you want cut and how you'll use the space afterward, because the shape of the cut decides which saw does the work. We mark the lines, make the cuts, and then either haul the pieces away or leave them in place, and our estimate says plainly whether it covers the hauling or only the sawing, so there's no surprise when the crew packs up. For indoor work, we go over the saw we'll use and how we'll catch the water and slurry, the gray mud that wet cutting makes, before any cutting starts.
Cutting is often the first half of a repair. When we saw out a sunken piece of driveway, we can pour the replacement as part of our concrete driveway building work, and a clean saw line does the same for a patio, letting new concrete patio construction meet the old slab neatly. If you're filling the gap, I'd rather you spend on digging out and packing the subgrade, what the slab sits on, than on a fancier finish, because the base is hidden on day one but it's what keeps the new piece from settling the way the old one did.
Flat sawing for slabs
This is the saw for driveways, patios, sidewalks and floors, the flat concrete the trade calls flatwork. It suits taking out a damaged section or cutting a trench across a floor.
Wall sawing for openings
A track-mounted wall saw runs along a rail fixed to the wall, so it cuts where a floor saw can't work. It suits a new doorway or window in a basement or foundation wall.
Core drilling for round holes
A core drill cuts a clean round hole for a pipe, drain or conduit. It's normally priced on its own rather than as an ordinary saw cut, so it shows up as a separate line on a quote.
Wire and hand saws
A wire saw handles thick or heavily reinforced sections, and hand saws reach tight corners and smaller openings. They suit the cuts a larger saw can't get to.
Get a written concrete cutting estimate, with every cut explained
We reply within one business day and set a time for me to come out, look at what needs cutting and talk it through with you. The estimate is free, done at your property, and there's no obligation. You'll get it in writing, so you can set it beside any other quote and compare.
(620) 482-9704Concrete cutting in Liberal: what the city asks for
The City of Liberal requires permits for a variety of building, construction and demolition work, and cutting concrete is often part of that kind of project. Whether your cut needs one isn't something I'll guess at, so we check with the city's Building and Code Enforcement Department, take care of the permit when one is required, and let you know what we learn. If you'd like to ask them yourself, they answer permit questions at (620) 626-2261.
We're based in Liberal and work in Liberal and the cities around it, where the cutting we do is mostly sunken driveway panels, trenches across garage floors and new openings in basement walls. Hot, windy days dry slurry fast onto driveways and siding, so we keep it contained and rinse as we cut.
What happens when you call us to cut concrete in Liberal?
Call or send us a note
Call (620) 482-9704 or use the form, and we'll set a time for me to come out. It helps to tell us what's being cut and whether it's indoors.
I look at the job
I ask how you'll use the space afterward, check the concrete and what may run through it, and answer every question you have. You get a written estimate that explains what we'd cut, how and why, so the price makes sense before you agree to anything.
We handle paperwork and timing
Once you decide to go ahead, we look into the city paperwork for your job. We plan the work around the weather, since rain and wind affect outdoor cutting and cleanup.
We cut and clean up
I'm on site with our crew from setup through cleanup. When we finish, the pieces are hauled away or left in place, just as your estimate said.
Frequently asked questions
What does concrete cutting cost per foot in Liberal?
Professional concrete saw cutting across the US usually costs about $3 to $15 per linear foot for the sawing itself. Reinforced or deeper slabs cost more per foot than easy-to-reach ones, and hauling the pieces away or scanning the slab first adds to the total. We give you the figure for your own job after I've seen it.
Will a concrete cutting company also remove the concrete?
Not always, because sawing concrete and removing it are separate jobs, and some cutters make the cuts and leave the panels where they lie. When you compare quotes, check whether each price includes taking the concrete away or covers only the sawing. Ours says which, in writing.
Do I need a permit to cut concrete in Liberal, KS?
You may, and it's the city that decides, not the contractor. As we said above, we check your job with the city before work starts and take care of the permit if one is required, so you aren't left guessing.
Is it safe to cut concrete in my basement?
It can be, when the saw and the setup are chosen for indoor work. Gasoline-powered saws give off carbon monoxide, and workers have died from it on a basement job, so before any indoor cutting, ask what fuel the saw runs on. We talk that through with you before we start.
How do I know if my slab needs to be scanned before cutting?
If the cut goes through structural concrete, the kind that holds up part of the house, it may need a scan first to find the rebar, pipes and conduit set inside it. A scan takes time and adds to the budget, so it's better to know about it at the estimate than on cutting day.
What is the best way to handle the water from wet concrete cutting?
Collect it rather than letting it run off, because water from wet cutting turns into an alkaline slurry full of fine cement particles, and on most sites it can't simply go down a drain. It's fair to ask any crew how they'll catch it. The federal safety rule for handheld saws also calls for a built-in water feed to the blade to keep dust down, so that's worth asking about too.
Liberal, KS
Show us what needs cutting, and where
When you call (620) 482-9704 or write to sales@concreteliberal.com, tell us whether it's a slab or a wall, whether you want the pieces hauled off and whether it's indoors, so I arrive with the right questions.